This family of products are able to handle up to 3 translations and 3 rotations (motion range and the degree of freedom can be adapted to costumers’ requirements). This large family can be divided into the following category of products:



»MX100x series - 1 degree of freedom – translation (T) or rotation (R)
The MX1001 is an active translation stage for very high precision positioning. Based on parallel kinematics and flexures, the MX1001 has no friction, no wear and no backlash. It is perfectly adapted for clean room applications.

»MX200x series - 2 degrees of freedom – 2 rotations (RR) or 2 translation (TT)
This product category represents a passive system, called self-levelling, to insure the parallelism between two surfaces during assembling process.

»MX300x series - 3 degrees of freedom – 3 translation (TTT)
The MX3001 is an XYZ ultra high precision manipulator with nanometric positioning resolution over 8 mm motion range in three directions.

»MX400x series - 4 degrees of freedom – 2 rotations and 2 translation (TT/RR)
The MX4001 is an XY-RX-RY ultra high precision manipulator with nanometric positioning resolution over 8 mm motion range XY and 4° in RXRY.

»MX600x series - 6 degrees of freedom – 3 rotations and 3 translation (TTT/RRR)
This micro-positioning device reaches its first vibration mode at over 200 Hz. It highly adaptable to perform high dynamic tasks, such as fibber alignment.

»Z Axis for Microscopy - DC Version - 400µm of motion range
Innovative Z axis for microscopy Requiring only one actuator. Angular errors below 15µrad (full range)

Some of these products are directly issued from the Engineering Department of Mecartex.
It is indeed possible to make alternative solutions very quickly starting from the solutions
already developed.